Categories

Knowledge

Jaw Crusher
Aug 16, 2018

The jaw crusher is also a jaw crusher, referred to as E-breaker. It is mainly used for medium-sized crushing of various ores and bulk materials. It is widely used in mining, smelting, building materials, roads, railways, water conservancy and chemical industries. The highest compressive strength of the crushed material is 320 MPa. The performance characteristics are large crushing ratio, uniform product granularity, simple structure, reliable performance, simple maintenance and low operating cost.


basic introduction

This series of jaw crusher ( jaw crusher) has the characteristics of large crushing ratio, uniform product size, simple structure, reliable work, easy maintenance and economical operation. Jaw crusher is widely used in mining, building materials, chemical industry, metallurgy and other industries. It can fight coarse and medium crushing of various ores, rocks and other materials with compressive strength not more than 320MPa. It is ore crusher, coal gangue crusher, etc. The preferred equipment for crushing ore materials.


The jaw crusher is mainly used as a coarse crusher and a medium crusher in mining, building materials and infrastructure. According to the width of the feed port, it is divided into three types: large, medium and small. The feed port width is larger than 600MM for large machines. The feed port width is 300-600MM for medium-sized machines. The feed port width is smaller than 300mm for small-sized machines. machine. The jaw crusher has a simple structure, is easy to manufacture, reliable in operation, and easy to use and maintain.


The working part of the jaw crusher is two jaws, one is a fixed jaw (fixed), the vertical (or the upper end is slightly inclined) fixed on the front wall of the body, and the other is the movable jaw (moving), the position Tilting, forming a large and small crushing cavity (working cavity) with the fixed jaw. The movable jaws periodically reciprocate against the fixed jaws, sometimes separated and sometimes close. When separated, the material enters the crushing chamber, and the finished product is discharged from the lower portion; when it is close, the material between the two jaws is crushed by bending, bending and splitting.


The jaw crusher can be divided into a simple swing jaw crusher (simplified pendulum jaw crusher) according to the different swinging modes of the movable jaw. There are three kinds of complex swing jaw crusher (complex pendulum jaw crusher) and integrated swing jaw crusher.


  • QR CODE
  • facebook