Cone Crusher technical advantage
Aug 16, 2018

1. Large crushing ratio and high production efficiency

-- Combining higher speeds with strokes, the SMH crusher's rated power and throughput are greatly improved, increasing the crushing ratio and production efficiency. The hydraulic cone crusher is a perfect combination of crushing stroke, crushing speed and shape of the crushing chamber.

2. Consumable parts consume less and operate at low cost

-- Reasonable structure, advanced crushing principle and technical parameters, reliable operation and low operating cost; all parts of the crusher are wear-resistant, reducing maintenance costs to a minimum, and the general service life can be increased by more than 30%.

3, laminated fracture, excellent finished grain shape

-- By using the special crushing cavity designed by the principle of intergranular lamination and the matching speed, instead of the traditional single particle crushing principle, the selective crushing of the material is realized, and the fine material ratio and cube content of the product are significantly improved. The needle-like material is greatly reduced.

4, hydraulic protection and hydraulic clear chamber, high degree of automation, reducing downtime

--Hydraulic adjustment of the discharge opening and overload protection greatly improve the operation level of the crusher, making maintenance easier, more convenient operation and shorter downtime; SMH series cone crusher bidirectional iron release hydraulic cylinder can pass the iron block The crushing chamber, in the case of iron and instantaneous smoldering, can hydraulically top the top and automatically discharge the material, which greatly reduces the trouble of manual discharge of the original spring cone crusher.

5, thin oil lubrication, reliable and advanced, improve service life

-- Unique thin oil lubrication system design greatly improves equipment life. The high-performance non-contact labyrinth seal has no wear, improves the reliability of dust blocking, and fundamentally eliminates common faults such as oil-water mixing of the original spring cone crusher.

6, a variety of crushing cavity type, flexible application, adaptability

--SMH cone crusher only needs to change the fixed cone liner and moving cone liner. The crushing cavity shape can be arbitrarily changed from standard super-thick cavity type to short head ultra-fine cavity type, adapting to a wide range of product particle size requirements.

7, easy maintenance, easy to operate

-- All parts of the cone crusher can be disassembled and maintained from the top or side. The moving cone and the fixed cone are easy to assemble and disassemble. There is no need to disassemble the frame and tighten the bolts. Therefore, it is more convenient to replace the liner with the cone crusher. The hydraulic motor is used to optimize the crusher production efficiency.

8, it provides higher production capacity, the best product shape, and easy to automatically control, with maximum reliability and flexibility, truly create more value for users.

  • facebook